HP OneView for VMware vCenter - Manual (Page 5)

2 Installation
Installing the software
Prerequisites
For prerequisites, see the vCenter Operations Manager vApp Deployment and Configuration Guide
located at:
http://www.vmware.com/support/pubs/vcops-pubs.html
Installation Procedure
1. Download HP OneView for VMware vCenter Operations Manager from the following site:
http://www.hp.com/go/ovvcenter
Extract the downloaded zip file to a temporary folder to obtain the PAK file.
2. Open a browser window and log in to the vCenter Operations Manager Administration GUI
as the admin user.
For example: https://xx:xx:xx:xx/admin/ (where xx:xx:xx:xx is the IP address of the
UI virtual machine in the vApp).
3. On the Update tab, click Browse to locate the temporary folder and select the PAK file.
4. Click Update and click OK to confirm the update.
The vCenter Operations Manager Administration GUI uploads the PAK file.
5. Read and accept the EULA, then click OK.
6. Click OK to start the update process.
The update might take several minutes. Status information appears on the Update tab when
the update is finished.
After the installation completes, the screen displays:
Last update completed successfully
7. Open a browser window and log in to the vCenter Operations Manager Custom GUI as the
admin user.
For example: https://xx:xx:xx:xx/vcops-custom/ (where xx:xx:xx:xx is the IP address
of the UI virtual machine).
8. Click ADMIN
→SUPPORT.
9. Click the Info tab.
10. Verify that the build number in the Adapter Version column for the adapter matches the build
number in the PAK file that you uploaded.
11. Click on the Describe icon to the right of the Adapter Info header to begin the Describe process.
Installing the software 5