Nilfisk-ALTO 3.4 - Manual (Page 16)

Output Delay only delays the signal of a specific output.
Also called Channel Delay, output delay is mainly used to compensate for the distance
between different blocks of the same sound system (for example clusters) or to correct
internal alignment of a speaker enclosure components.
5.2.1 Input Delay
Use this menu page to adjust the delay lines of Input A, Input B and SUM.
The values can be set in the following ranges:
The measurement unit can be chosen with the function ( menu submenu). Delay Unit UTILITY - Units
5.2.2 Output Delay
Use this menu page to adjust the delay lines of outputs 1, 2, 3, 4, 5, and 6.
15
IN A ADC
unit
m
mm
ms
range step
0.0 ~ 900.0 0.5
0 ~ 900000 7
0 ~ 2621 1
INPUT DELAY
us 0 ~ 2621438 21
I n p u t D e l a y
I N A D E L A Y
7 7 m S
O u t p u t D e l a y