Nilfisk-ALTO 3.4 - Manual (Page 15)

5.2.Delay Menu
Use this menu to work on the systems delay lines.
The practical differences between and Delay Input Delay Output
A Delay is only a processor by means of which a signal is deliberately delayed by a programmable length of time.
From a technical point of view, the Delays applied to the inputs and outputs are equivalent.
Nevertheless, their application is different:
In these pages, the number of the parameters and how they are presented varies according
to the configuration of the PRESET and according to and settings ( Ganging Units UTILITY menu). In fact, these
pages only show the parameters that can actually be used, in the most suitable form of editing.
Parameters
Input Delay delays the signal of an input (or the sum of the inputs) before sending it to the routing system.
In this way, all the outputs which depend on that input are delayed by the same length of time.
Also called input Delay is mainly used to compensate for the effects Master Delay, dues to
the distance between the various speaker enclosures or between various blocks of a complex
14
Input Delay
Output Delay
Parameters
menu
DELAY
Parameters
Ignore the data received via the serial ports. Accept the data received via the serial ports.
INPUT DELAY
OUTPUT DELAY
DELAY
I n c o m i n g D u m p
n o r e I g
I n c o m i n g D u m p
c e p t A c
sound system (for example in large concert halls, stadiums, etc.), Thus achieving virtual alignment.