Nilfisk-ALTO 3.4 - Manual (Page 12)

11
There are 3 distinct categories of PRESETS:
User PRESETS
Card PRESETS
5.1.1 Load PRESET
This menu page allows the required PRESET to be loaded and made operatively.
To load a PRESET:
Use the to reach the required PRESET. DIAL
10 Factory PRESETS, 64 User PRESETS and 128 Card User PRESETS are available.
the display shows the following message:
Press ENTER.
Factory PRESETS
L o a d
2 U 2 x 2 W
P r e s e t
+ 2 M A X
L o a d
U
P r e s e t
6 4 * D e f a u l t *
A 1 3 5
U 6 4 * D e f a u l t *
B 2 4 6
L o a d
C
P r e s e t
1 2 8 N O C A R D
A 1 3 5
F 3
B 2 4 6
2 x 3 W
Scrolling through the 128 memory areas reserved for the Card when the Multimedia Memory Card isn't inserted,
Factory-programmed storage.
Factory PRESETS can be used normally, temporarily modified, but can't be cancelled,
overwritten or permanently modified. Factory PRESETS contain some specific settings
for certain types of enclosures and all the system's usable configurations. For this
reason they're the ideal starting point for creating custom PRESETS.
Stored data that can be programmed by users.
User PRESETS are internal memory areas in which your own personal settings can
be saved.
Stored data which can be programmed by users on a Multimedia Memory Card.
Card PRESETS are external memory areas in which your own personal settings can
be saved.
Note: since the system must always be configured, there are no empty memory areas. All the User and Card
areas unused by custom are automatically occupied by the , which contains PRESETS *Default* PRESET
a standard start configuration with all the values of the various parameters at zero.
The system returns to default status and the display shows the information on the PRESET that has just been
loaded.