12 networking glossary, Numbers, Networking glossary – HP Deskjet 6620 Color Inkjet Printer User Manual
Page 32: Resetting the printer to the factory defaults, Glossary, 10/100 base-t, Connected to a network, Switch, Router, Firewalls
Note: For instructions on using the printer's EWS, see the online help. To open
the online help, click Help under the Other Links heading.
Caution: If you lose your connection, you may need to use the new settings
to reconnect. If the printer loses its network connection, you may need to
reset it to factory defaults and reinstall the software.
5.2.11 Resetting the printer to the factory default settings
Once the printer is configured for a network, its configuration settings are saved in
its memory.
Resetting the printer to its factory default settings will clear all the settings from the
printer's memory for your network. This should only be done as a last resort when
troubleshooting the printer.
Also, resetting the printer to its factory default settings erases the
Resetting the printer to its factory default settings may require you to reinstall the
printer software. Additionally, you will also have to reconfigure the printer's security
settings.
Follow these steps to reset the printer to the factory default settings:
1. Verify that the printer is powered on.
2. Press and hold down the Report Page button.
3. While holding down the Report Page button, press the Cancel button three
times.
4. Release the Report Page button.
5.2.12 Networking glossary
numbers
10/100 Base-T: A technical term for Ethernet. 10/100 refers to the speed at which
the Ethernet network functions. 10 indicates 10 megabits per second (Mb/s) for
normal Ethernet, and 100 indicates 100 Mb/s for Fast Ethernet.
a
AutoIP: A process by which a device on a network automatically assigns an IP
address to itself.
b
BOOTP: Bootstrap Protocol (BOOTP) is an Internet protocol that enables a device
to discover its own IP address, the IP address of a BOOTP server on the network,
and a file to be loaded into memory to boot the machine. This enables the device
to boot without requiring a hard or floppy disk drive.
HP Deskjet 6600 series printer User's Guide
32