HP Deskjet 6620 Color Inkjet Printer User Manual
Page 129

5. Remove any paper from inside the duplexer.
6. Close the duplexer, and then re-attach the duplexer to the printer.
Option for automatic two-sided printing cannot be selected
Verify the following:
• The duplexer is attached to the printer.
• A supported paper size is selected in the
• A supported paper type is selected in the Paper Type/Quality panel of the
For a list of support paper types and sizes, see the
Only one side of the page prints when the two-sided printing option is
enabled
Verify the following:
• The
are set in both the printer software and the application
you are using.
• The photo paper is not curled, if you are printing on two-sided photo paper.
Photo paper should be flat before printing. See
for more information.
• The paper size selected in the
dialog box is supported by the
duplexer.
• The paper type selected in the Paper Type/Quality panel is supported by the
duplexer.
See the documentation that came with the duplexer for a list of supported paper
types and sizes.
HP Deskjet 6600 series printer User's Guide
129