HP Officejet Pro K850dn Printer - Manual (Page 21)

Transparencies
● Insert transparencies with the rough side down and the adhesive strip pointing towards the back
of the printer.
● Use the Best mode to print transparencies. This mode provides longer drying time and ensures
that the ink dries completely before the next page is delivered to the output tray. Allowing wet
media to stack up might cause smearing.
Custom-size media
● Use only custom-size media supported by the printer.
● If your application supports custom-size media, set the media size in the application before
printing the document. If not, set the size in the printer driver. You might need to reformat
existing documents to print them correctly on custom-size media.
Understanding specifications for supported media
This section provides information regarding the sizes, types, and weights of media that the printer
supports. It also provides information on the tray capacity.
NOTE An automatic two-sided printing accessory (duplex unit) comes with the HP Officejet
Pro K850dn Color Printer.
Supported media sizes
Media size Input tray Front manual
feed slot Rear manual
feed slot Auto duplex
(duplex unit) Manual duplex
Standard paper sizes
U.S. Letter
(215.9 by 279.4
mm; 8.5 by 11
inches)
Legal
(215.9 by 355.6
mm; 8.5 by 14
inches)
Super B
(330 by 483 mm;
13 by 19 inches)
A4
(210 by 297 mm;
8.3 by 11.69
inches)
Executive
(184.15 by 266.7
mm; 7.25 by 10.5
inches)
ENWW Selecting print media 13