HP CD-Writer Plus Internal 8200i Drive - Manual (Page 12)

English-12 Installing CD-Writer Plus and Software
If your computer uses rails or mounting brackets you may not need
screws to secure the rails in the bay.
24. Replace your computer's cover.
25. Plug your computer, monitor, and other devices into a wall outlet or
power strip, and turn ON your computer.
26. Insert Disc 1 into either the CD-ROM drive or the CD-Writer Plus. The
CD-Writer Plus software will make sure that it is communicating
properly.
27. Software installation will automatically continue. Follow the instructions
on the screen to install the software you want.
If You Have Problems
Read the Install Recommendation. (See page 5.)|
The Install Recommendation makes recommendations for installation.
Can’t find the IDE controller in your computer?
Check your computer’s manual or call the manufacturer for assistance.
DO NOT ATTACH THE CD-WRITER PLUS DRIVE TO A SOUND BOARD’S
IDE CONTROLLER.
Now your computer won’t boot.
■ Turn your computer off and then back on.
Use all four screws
2
3
4
1