HP Deskjet D1341 Printer - Manual (Page 64)

Blank pages print
● The protective piece of plastic tape might still be attached to the print cartridges.
Verify that the plastic tape has been removed from the print cartridges.
1 Remove plastic tape
● The print cartridges might be out of ink. Replace one or both empty print cartridges.
For more information, see
View estimated ink levels .
Document is misprinted
● Text and images are misaligned
● Document is printed off-center or at an angle
● Parts of the document are missing or printed in the wrong place
● Envelope is printed at an angle
● Document does not reflect the new print settings
Text and images are misaligned
If the text and images on your printouts are misaligned, then align the print cartridges.
Document is printed off-center or at an angle
1. Verify that only one type of paper is placed in the paper tray, and that the paper has
been placed in the tray correctly.
2. Verify that the paper guide fits firmly against the edge of paper.
3. Reprint the document.
Parts of the document are missing or printed in the wrong place
Open the Printer Properties dialog box and confirm the following options:
Tab Setting
Basics Orientation: Verify the appropriate orientation.
Paper/Quality Size is: Verify the appropriate paper size.
Effects
Scale to fit: Select this option to scale text and
graphics to the paper.
Finishing Poster printing: Verify that Off is selected.
Chapter 10
62 HP Deskjet D1300 series