HP ProLiant DL360e Gen8 Server - Manual (Page 43)

Hardware options installation 43
9. If you are installing the optical drive in an SFF drive model, connect the optical drive cable to the optical
drive.
10. Route the optical drive cable along the side of the system board, and then connect the cable to the
system board:
o Four-bay LFF drive model
o Eight-bay SFF drive model
11. Install the PCI riser cage (on page 20 ).
12. Install the access panel (on page 19 ).
13. Install the server into the rack (" Installing the server into the rack " on page 26 ).
14. Power up the server (on page 16 ).
Hot-plug fan module option
To provide sufficient airflow to the system if a fan rotor fails, the server supports redundant fans.