HP LaserJet 6pmp Printer series - Manual (Page 125)

Connect to the Middle of a Network
1 Turn the printer off. Insert the new connector box cable into the
LocalTalk port of the printer.
2 Insert one end of the network cable into the new connector box.
3 Set the other end of the new cable next to a connector box on the
network.
4 Unplug one cable from the connector box on the network.
5 Insert the new cable into the connector box on the network.
6 Insert the cable you removed from the network into the new connector
box. Turn the printer on.
Figure C-2
Figure C-3
C-2 Connect Printer to a LocalTalk Network
EN