HP OmniBook 4100 Notebook PC - Manual (Page 23)

Basic System Test
Test Result: PASS
3-3
Test Result: PASS
If the basic system test is successful, a screen similar to the following will appear:
The following action is recommended:
•
If you are not investigating a hardware problem, there is no need to continue
with the advanced tests or to create a support ticket. Remove the diagnostic
diskette from the floppy drive and press F3 to exit OmniBook DiagTools.
•
If you are investigating a potential hardware problem, press F4 to create a
support ticket. Although no failure was detected, the support ticket will be
effective for communicating the test results and PC configuration to your local
or HP-dedicated support agent. (To learn more about the support ticket, refer to
chapter 5.)
Also, for a potential hardware problem, you can proceed to the advanced
system tests, since no error was traced using the basic system test. However, if
you want assistance finding the problem or running the advanced tests, contact
your local or HP-dedicated support agent.
You can repeat the basic system test if desired. To do this, press F5.