HP StorageWorks XP Data Integrity Check XP Software - Manual (Page 36)

Setup Key Management Server window
The following figure shows the Setup Key Management Server window.
The following table lists descriptions of the items in the Setup Key Management Server window of
the Setup Key Management Server wizard.
Description Item
Select whether to use the key management server: Key Management Server
•
Enable: (default) key management server is used.
•
Disable: key management server is not used.
The host name of the key management server: Host Name
•
Identifier: Type the identifier of the host.
•
IPv4: Type the IPv4 address of the host.
• IPv6: Type the IPv6 address of the host.
The port number of the key management server. Port Number
Values: 1 to 65535
Default: 5696
The time until the connection attempt to the key management server times
out. Timeout (sec.)
Values: 1 to 120
Default: 10
The interval to retry the connection to the key management server. Retry Interval (sec.)
Values: 1 to 60
Default: 1
The number of times to retry the connection to the key management server. Number of Retries
Values: 1 to 50
Default: 3
Shows the name of the client certificate file. Click Browse and select the
client certificate file to connect to the key management server. Client Certificate File Name
Shows a list of the client certificate file from which you can choose. Browse
For more information about the client certificate file, contact the server or
network administrator.
The password for the client certificate. Password
Character limits: 0 to 128
Valid characters:
• Numbers (0 to 9)
•
Upper case (A-Z)
• Lower case (a-z)
•
Symbols: ! # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ~
Type the password again for confirmation. Re-enter Password
Displays the name of the selected file. Select the root certificate file for
connecting to the key management server. Click Browse and select the file. Root Certificate File Name
Select the root certificate file. The form of the client certificate is X.509. Browse
36 DKA Encryption GUI Reference