Power requirements, Current, Temperature, humidity, and altitude – HP NonStop G-Series User Manual
Page 66: Table a-2, Temperature, humidity, and altitude specifications

Specifications
N1526A and N1527A ACL Tape Drive Installation and User’s Guide— 542756-003
A- 2
Power Requirements
Power Requirements
The tape drives exhibits a nominal steady state AC power comsumption of 192 watts,
and a maximum peak consumption of 240 watts.
Current
1.6 - 1.0 amperes (120 - 240 V ac)
Temperature, Humidity, and Altitude
Table A-2. Temperature, Humidity, and Altitude Specifications
Non-Operating - Long Term
Unpacked or Packed
Dry Bulb Temperature
-40°C to 60°C
Temperature Gradient
20°C/hour (across the range)
Temperature Shock
15°C (over 2 minutes)
Wet Bulb Temperature
30°C
Relative Humidity
5% to 95% (non-condensing)
Humidity Gradient
10%/hour.
Altitude (sea level)
-1000 feet to +10,000 feet
Transit - Short Term
Packed 7 days
Dry Bulb Temperature
-40°C to 60°C
Temperature Gradient
25°C/hour (across the range)
Temperature Shock
15°C (over 2 minutes)
Wet Bulb Temperature
30°C
Relative Humidity
5% to 95% (noncondensing)
Altitude (sea level)
-1000 feet to +10,000 feet