A specifications, Hardware specifications, Primary power – HP NonStop G-Series User Manual
Page 65: Voltage limits, Frequency limits, A. specifications, Table a-1, Specifications, Hardware specifications primary power
N1526A and N1527A ACL Tape Drive Installation and User’s Guide— 542756-003
A- 1
A
Specifications
Hardware Specifications
Primary Power
Voltage Limits
The tape drives are capable of using any nominal AC voltage between 100 and 240 V
ac power, at 50 or 60 Hz. The machines are capable of powering up and operating
without error from any voltage within the ranges specified:
Frequency Limits
The tape drive are capable of operation at either 50 Hz or 60 Hz. They automatically
adjust for 50-60 Hz primary power operation, without requiring user intervention or
modification.
Table A-1. Hardware Specifications
Operation Specification
SCSI Interface
HVD
Drive Configuration
1
Number of Cartridges
15
Maximum Data Capacity
6.0 terabytes
Maximum Transfer Rate
115.2 gigabytes/hour
Mount Time, into Tape Drive
10 seconds
Dismount Time, from Tape Drive
10 seconds
Reliability
MTBF
250,000 hours
MSBF 2,000,000
cartridge
cycles
Design Life
7 yrs. @ 30 % duty cycle
MTTR
10 minutes
Physical Characteristics (Tabletop)
Height
9.1 inches
Width
19 inches
Depth
31.5 inches
Weight
58 pounds