HP NonStop G-Series - Manual (Page 23)

N1526A and N1527A ACL Tape Drive Installation and User’s Guide— 542756-003
3 -1
3
Installing and Configuring the ACL
Tape Drive for the NonStop S-Series
Server
This section includes these topics:
Installation
1. Check that the power switch on the tape drive is set to the off position. See
Figure 3-1 .
2. Connect the power cord to the tape drive’s AC power receptacle. See Figure 3-1 .
3. Make sure the power cord is fully seated.
Installation 3-1
Configuration 3-5
Note. Do not attach the male end of the power cord to a power outlet at this time.