HP NonStop G-Series - Manual (Page 42)

Operation
N1526A and N1527A ACL Tape Drive Installation and User’s Guide— 542756-003
4- 14
Barcode Labels
Barcode Labels
Figure 4-14 show you how to install a barcode label onto a tape cartridge.
LTO Cartridge Media
The following are tips to ensure maximum LTO cartridge media performance and life:
1. Place labels only in the recessed area, just above the write protection switch (See
Figure). Never place labels on the top, bottom sides or rear of the cartridge, they
can cause loader faults and interfere with normal operations. Such labels can
come off inside the equipment causing damage.
2. Always inspect cartridges for incorrect or improperly attached labels.
3. Never erase information on a cartridge label, always replace the label.
Figure 4-13. Tape Magazine With Tape Cartridges Installed