HP NonStop G-Series - Manual (Page 50)

Troubleshooting
N1526A and N1527A ACL Tape Drive Installation and User’s Guide— 542756-003
6 -2
Platform Problems
Platform Problems
An incorrect installation or configuration can cause platform problems. In this case, the
unit appears to be operating normally, but no data can be interchanged. You also might
or might not get an error code on the graphical user interface (GUI) touch screen. To
identify an error caused by this type of problem, check your installation and
configuration setup. For information on how to correctly install and configure the unit,
see
Installing and Configuring the ACL Tape Drive for the NonStop S-Series Server on
page 3-1.
General drive errors usually result from a miscommunication between the ACL and
tape drive or a mechanical malfunction within the ACL. Both platform problems and
general drive errors display an error message and a Fault Symptom Code (FSC) on
the GUI touch screen. Use an FSC to report errors to your service provider, or in some
cases, to determine a recovery procedure.
Figure 6-1. LTO Tape Drive