HP IO Accelerator for BladeSystem c-Class - Manual (Page 27)

Utilities 27
Options Description
-u Show unavailable fields. Only valid with -fj or -fx.
-U Show unavailable fields and details why. Only valid with -fj or -fx.
-F Print the value for a single field (For field names, see the next option). Requires that a
device be specified. Multiple -F options may be specified.
-l List the fields that can be individually accessed with -F.
CAUTION: Output Change
Starting with version 3.0.0 and later, the standard formatting of fio-status output has
changed. This will affect any custom management tools that used the output of this utility.
Basic information: If no options are used, fio-status reports the following basic information:
• Number and type of devices installed in the system
• IO Accelerator version
Adapter information:
• Adapter type
• Product number
• External power status
• PCIe power limit threshold (if available)
• Connected IO Accelerator devices
Block device information:
• Attach status
• Product name
• Product number
• Serial number
• PCIe address and slot
• Firmware version
• Size of the device, out of total capacity
• Internal temperature (average and maximum, since IO Accelerator load) in degrees Centigrade
• Health status: healthy, nearing wearout, write-reduced or read-only
• Reserve capacity (percentage)
• Warning capacity threshold (percentage)
Data volume information: If the -d option is used, the following data volume information is reported in
addition to the basic information:
• Physical bytes written
• Physical bytes read
All information: If the -a option is used, all information is printed, which includes the following information
in addition to basic and data volume information.
Adapter information: