HP ProLiant SL250s Gen8 Server - Manual (Page 95)

Troubleshooting 95
Troubleshooting
Troubleshooting resources
The HP ProLiant Gen8 Troubleshooting Guide, Volume I: Troubleshooting provides procedures for resolving
common problems and comprehensive courses of action for fault isolation and identification, issue resolution,
and software maintenance on ProLiant servers and server blades. To view the guide, select a language:
• English ( http://www.hp.com/support/ProLiant_TSG_v1_en )
• French ( http://www.hp.com/support/ProLiant_TSG_v1_fr )
• Spanish ( http://www.hp.com/support/ProLiant_TSG_v1_sp )
• German ( http://www.hp.com/support/ProLiant_TSG_v1_gr )
• Japanese ( http://www.hp.com/support/ProLiant_TSG_v1_jp )
• Simplified Chinese ( http://www.hp.com/support/ProLiant_TSG_v1_sc )
The HP ProLiant Gen8 Troubleshooting Guide, Volume II: Error Messages provides a list of error messages
and information to assist with interpreting and resolving error messages on ProLiant servers and server
blades. To view the guide, select a language:
• English ( http://www.hp.com/support/ProLiant_EMG_v1_en )
• French ( http://www.hp.com/support/ProLiant_EMG_v1_fr )
• Spanish ( http://www.hp.com/support/ProLiant_EMG_v1_sp )
• German ( http://www.hp.com/support/ProLiant_EMG_v1_gr )
• Japanese ( http://www.hp.com/support/ProLiant_EMG_v1_jp )
• Simplified Chinese ( http://www.hp.com/support/ProLiant_EMG_v1_sc )
System battery
If the server no longer automatically displays the correct date and time, then replace the battery that provides
power to the real-time clock. Under normal use, battery life is 5 to 10 years.
WARNING: The computer contains an internal lithium manganese dioxide, a vanadium
pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not
properly handled. To reduce the risk of personal injury:
• Do not attempt to recharge the battery.
• Do not expose the battery to temperatures higher than 60°C (140°F).
• Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
• Replace only with the spare designated for this product.
To remove the component:
1. Power down the server (on page 15 ).
2. Disconnect all peripheral cables from the server.