HP ProLiant SL250s Gen8 Server - Manual (Page 16)

Operations 16
CAUTION: To avoid damage to the server, always support the bottom of the server when
removing it from the chassis.
3. Remove the server from the chassis:
a. Press the release button on the front of the server, and then extend the tray handle.
b. Press the release button on the side of the server.
c. Use the tray handle to pull the server out of the chassis.
4. Place the server on a flat, level work surface.
Remove the front GPU cage
1. Power down the server (on page 15 ).
2. Disconnect all peripheral cables from the server.
3. Remove the server from the chassis (on page 15 ).