HP ProLiant SL250s Gen8 Server - Manual (Page 68)

Hardware options installation 68
Item Connector Description
server front panel
3 Video For connecting a video monitor
4 USB For connecting up to two USB devices
5 Serial For trained personnel to connect a null modem
serial cable and perform advanced diagnostic
procedures
Redundant hot-plug power supply option
CAUTION: All power supplies installed in the server must have the same output power capacity.
Verify that all power supplies have the same part number and label color. The system becomes
unstable and may shut down when it detects mismatched power supplies.
Label color Output
Orange 750 W
Green 1,200 W
White 1,200 W -48Vdc
Yellow 1,500 W
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
To install the component:
1. Unfasten the cable management solution to access the power supply bays.
2. Remove the power supply blank.