HP ProLiant SL250s Gen8 Server - Manual (Page 19)

Operations 19
Install the interposer board
1. Install the interposer board.
2. Install the front GPU cage (on page 17 ).
3. Install the server into the chassis (" Installing the server into the chassis " on page 31 ).
4. Connect all peripheral cables to the server.
5. Power up the server (on page 15 ).
Remove the front GPU bracket
1. Power down the server (on page 15 ).
2. Disconnect all peripheral cables from the server.
3. Remove the front GPU cage (on page 16 ).
4. Remove the interposer board (on page 18 ).