Iscsi boot setup using fast!util – HP QLogic QMH4062 1GbE iSCSI Adapter for c-Class BladeSystem User Manual
Page 19
Setup 19
7.
Select Reboot System from the Exit Setup Menu prompt when the system has finished saving the
configuration.
iSCSI boot setup using Fast!UTIL
Fast!UTIL is the QLogic iSCSI BIOS Configuration utility used to configure iSCSI. Use Fast!UTIL to program the
QLogic iSCSI adapter to boot from the SAN.
You must enable iSCSI before you complete the iSCSI boot setup. See iSCSI function configuration (on page
) for details. With iSCSI enabled, launch the QLogic NC526 Series Adapters BIOS. The first Ctrl+Q
prompt is for the setup menu.
To access Fast!UTIL for PXE and iSCSI, press Ctrl+Q at the second banner that displays during the QLogic
NC526 Series Adapters BIOS initialization.
After you have chosen an adapter, wait several seconds for the Fast!UTIL menu to appear. The Fast!UTIL
Options menu for iSCSI contains the following selections:
•
Configuration Settings
•
Scan iSCSI Devices
•
iSCSI Disk Utility
•
Ping Utility