beautypg.com

Adjusting the volume, Muting the sound, Changing the picture mode – HP LT4200 42 inch Professional LCD HDTV User Manual

Page 34: Changing channels, Selecting the last channel, Selecting a favorite channel, Changing the picture mode changing channels

background image

24

HP HDTV User’s Guide

Adjusting the Volume

To increase or decrease the sound, press:

The remote control Volume buttons.

Or

The TV Volume buttons.

The indicator bar on the TV shows the increase or

decrease.

Muting the sound

1

Press the Mute button on the remote control to

temporarily turn off the sound.

2

Press the Mute button again to restore the sound

back to the previous level.

Changing the Picture

Mode

Press the Picture button on the remote control to display

the currently selected video mode. Keep pressing the

Picture button until you reach the desired picture. The

Picture modes are:

Standard: Good for normal viewing conditions

with low room lighting.

Studio: Good for watching movies in a darkened

room. Provides a soft, film-like picture.

Vibrant: Good for viewing in a well-lit room,

enhances the contrast and sharpness.

User: Displays the custom settings that you

configured in the OSD. For more information about

defining the picture settings, see “Using the Picture

Menu” on page 31.

Changing Channels

To change to the next higher or lower channel, press:

The remote control Ch+ or Ch– buttons.

Or

The TV Channel buttons.

To change to another channel, enter a one-digit,

two-digit, or three-digit number, or press the channel up

or down buttons.
To select a specific channel number (for example,

channel 25), complete the following procedure within

four seconds:

1

Press the 2 button on the remote control.

2

Press the 5 button.

3

Press Enter.

To select a specific digital channel number (for

example, 14-2, complete the following procedure within

four seconds):

1

Press the 1 button on the remote control.

2

Press the 4 button.

3

Press the – (dash) button.

4

Press the 2 button.

5

Press Enter.

Selecting the last channel

Press the Last button on the remote control to view the

previous channel that you viewed.

Selecting a favorite channel

You can quickly select a favorite channel by using the

Fav button on the remote control.
Press the Fav button on the remote control to view a list

of your favorite channels. Press an arrow button to

select a channel from the list, and then press OK.

Ch+

Ch-