HP LT4200 42 inch Professional LCD HDTV - Manual (Page 15)

G
ett
in
g
t
o
K
no
w
Y
ou
r TV
Getting to Know Your TV
5
TV (rear) Description
■
ANT/Cable In Connect a coaxial cable
from an off-air antenna or
cable signal source.
Standard Definition
Input:
■
AV Input 1:
S-Vid, Video,
Audio L and R
■
AV Input 2:
S-Vid, Video,
Audio L and R
For each AV Input
connector set:
■
Connect an S-Video
cable and left-right
audio cables from
optional equipment.
Or
Connect a composite
video cable and left-
right audio cables
from optional
equipment.
(Audio L and R
connectors are shared
within the AV
connector set.)
!
Do not connect video cables to both the
S-Vid and Video connectors.
TV (rear) Description (Continued)
Component High
Definition Input:
■
1: Y, Pb, and
Pr, and Audio
L and R
■
2: Y, Pb, and
Pr, and Audio
L and R
Connect component video
cables and left-right audio
cables from optional
equipment. Supports 480i,
480p, 720p, and 1080i
analog standard and high-
definition format inputs. The
TV automatically determines
what has been connected.
Some set-top boxes must be
set for a specific output
resolution.
TV (rear) Description (Continued)
Digital High
Definition Input:
■
HDMI 1 with
HDMI Audio
In L and R
■
HDMI 2
■
HDMI 3
(select
models only)
Supports 480i, 480p, 720p,
1080i, and 1080p digital
format inputs. The TV
automatically determines
what has been connected.
Some set-top boxes must be
set for a specific output
resolution.
For each HDMI
(High-Definition Multimedia
Interface) connector: Connect
an HDMI cable from optional
digital, high-definition
equipment.
For HDMI 1 with HDMI
Audio In: Connect a DVI
cable and DVI-to-HDMI
converter from optional DVI
equipment and left-right
audio cables connected to
HDMI Audio In L and R.
PC Input:
■
VGA
■
Audio L/R
Connect a VGA cable and
an audio cable from your PC
(Line out) to use the TV as a
monitor.
Audio Output:
■
Digital
(Optical)
■
Audio Output
L and R
For sound to an external
audio system:
■
Connect an optical cable
for digital sound out to
an optional external
digital audio system.
■
Connect left-right audio
cables for stereo sound
out to an optional
external (analog) audio
system. Use the left
(white) connector for
mono sound (single
cable).