HP LT4200 42 inch Professional LCD HDTV - Manual (Page 23)

Se
tt
in
g
U
p
t
h
e TV
Setting Up the TV
13
■
Standard Definition Input: Connect an
S-Video cable, or a composite video cable, and
left-right audio cables from the cable or satellite
set-top box. (Audio L and R connectors are shared
within the AV connector set.)
The AV Input connectors are:
■
1: S-Vid or Video, and Audio L and R
■
2: S-Vid or Video, and Audio L and R
To connect the set-top box:
1 Connect the set-top box input source cable(s) to the
rear of the TV, using one of the connector sets:
■
Digital High Definition Input: Connect
an HDMI cable to any of the HDMI
connectors: HDMI 1, HDMI 2, or HDMI 3
(select models only).
Or
Connect a DVI-D cable and DVI-to-HDMI
converter (from digital, high-definition cable or
satellite set-top box with a DVI connector) to
HDMI 1, and left-right audio cables to HDMI
Audio In L and R.
■
Component High Definition Input:
Connect component video cables and left-right
audio cables to the Component connectors:
■
1: Y, Pb, and Pr, and Audio L and R
Or
2: Y, Pb, and Pr, and Audio L and R
■
Standard Definition Input: Connect an
S-Video cable, or a composite video cable,
and left-right audio cables to the AV Input
connectors:
■
1: S-Vid or Video, and Audio L and R
Or
2: S-Vid or Video, and Audio L and R
S-Vid connection
Video connection
The Standard Definition Input (S-Vid, or
Video) connectors do not pass high-
definition TV signals.
CAUTION: Unplug power for the TV and
all connected components before
connecting the set-top box.