HP LT4200 42 inch Professional LCD HDTV - Manual (Page 29)

Tu
rn
in
g
On
th
e TV
Turning On the TV
19
Turning On the TV
Turning the TV On and Off
The TV has a Power button on the right side of the
panel. You can also use the Power button on the remote
control to turn on the TV.
Pressing the Power button turns the TV either on or off.
A Power light
B
Remote control sensor
C Power button
The Power light shows whether the TV is on or off.
When you will not be using the TV for an extended
period of time, press the Power button to turn off the TV,
and then unplug the AC power cord.
Using the remote control to turn the TV
on or off
Point the remote control at the remote control sensor on
the front of the TV, and press the remote control Power
button. The TV turns on or off.
A Remote Control Power button
Power light TV status
Lights blue TV is off but plugged
into the power source
Lights amber TV is powering on
(light turns off after
about 30 seconds)
Off TV is on, or the AC
power cord is
disconnected
Flashing amber or
flashing blue
Startup diagnostics are
in progress or an error
occured
POWER
A B
C
The initial setup starts when the TV powers
on for the first time. If the TV has been
turned on before, the Setup Wizard does
not start. To start the Setup Wizard from
the onscreen display (OSD) Setup menu,
see “Starting the Setup Wizard” on
page 42.
A
Source
Info
Last Ch+
Ch-
SAP
MTS Sound Picture
Menu As p ect
CC Sleep Fav
1
4
7
2 3
5 6
8 9
0 Enter
OK
back