Connecting to the tv, Choosing the av connection to use – HP LT4200 42 inch Professional LCD HDTV User Manual
Page 20
10
HP HDTV User’s Guide
Connecting to the TV
Set up the TV by connecting cables and connecting the AC power cord.
Choosing the AV connection to use
When connecting optional audiovisual (AV) equipment
as signal sources, the connectors on the equipment
may limit the type of connection you can use.
When your optional equipment has more than one type
of output connector, choose the connection that
provides the best-quality playback image.
The following table lists the available optional AV
equipment connections on the TV.
AV connection to use, in order of decreasing video playback quality (best to good)
Connection description
TV connector
Cable plug
HDMI (High-Definition Multimedia Interface) transmits an all-digital
signal. This is the recommended choice for high-definition signals,
and for playback from a digital set-top box, DVD player, or DVR
device.
For a DVI-D device, you can use a DVI cable with an DVI-to-HDMI
converter to connect video to the HDMI 1 connector on the TV, and
an audio cable to connect audio from the source to the HDMI
Audio In L and R connectors on the TV.
Use this connection for standard or high-definition video signals in
480i, 480p, 720p, 1080i, or 1080p input format from a set-top
box, DVD player, or other device. This TV does not support Dolby
Digital audio input over HDMI. When connecting a set-top box,
DVD player, or other device by means of the HDMI connector, set
the device audio output to PCM format.
Component video (Y, Pb, and Pr) transmits video as separate red,
green, and blue signals. Use this connection for standard or high-
definition video signals in 480i, 480p, 720p, or 1080i format from
a DVD player or other equipment.
S-Video transmits standard video as separate color and
black-and-white image signals and delivers a sharper image than a
composite video connection.
Video In (composite video) transmits standard video as a single
signal.