beautypg.com

HP LT4200 42 inch Professional LCD HDTV User Manual

Page 2

background image

The only warranties for HP products and services are set forth in the

express warranty statements accompanying such products and

services. Nothing herein should be construed as constituting an

additional warranty. HP shall not be liable for technical or editorial

errors or omissions contained herein.
HP assumes no responsibility for the use or reliability of its software

on equipment that is not furnished by HP.
This document contains proprietary information that is protected by

copyright. No part of this document may be photocopied,

reproduced, or translated to another language without the prior

written consent of HP.
Hewlett-Packard Company

P.O. Box 4010

Cupertino, CA 95015-4010

USA
Copyright © 2007 Hewlett-Packard Development Company, L.P.
May be licensed in the United States by one or both of U.S. Patents

Nos. 4,930,158 and 4,930,160 until August 28, 2008.

Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of

Dolby Laboratories.

HDMI, the HDMI logo and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC.
ENERGY STAR is a registered trademark owned by the U.S.

government.
HP supports lawful use of technology and does not endorse or

encourage the use of our products for purposes other than those

permitted by copyright law.
The information in this document is subject to change without notice.

Text set off in this manner indicates

information you need.

!

Text set off in this manner indicates

important information you need.

CAUTION: Text set off in this manner

indicates that failure to follow directions

could result in damage to equipment or

loss of information.

WARNING: This symbol is intended to alert

the user to the presence of important

operating and maintenance (servicing)

instructions in the literature accompanying

the appliance.

DANGEROUS VOLTAGE: Text set off in this

manner indicates the presence of

uninsulated voltages within the product

enclosure that may be of sufficient

magnitude to constitute a risk of electrical

shock to persons.