Energy saving (command: f l), Picture mode (command: d x), Contrast (command: k g) – HP LD4245tm 41.92-inch Interactive LED Digital Signage Display User Manual
Page 95
[c][ ][Set ID][ ][OK/NG][Data][x]
04. Energy Saving (Command: f l)
To set the Energy Saving function.
Transmission
[f][l][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: Minimum - Level 2
02: Medium – Level 2
03. Maximum – Level 3
05. Screen Off
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
** It may not be supported depending on the model.
05. Picture Mode (Command: d x)
To select the Picture Mode.
Transmission
[d][x][ ][Set ID][ ][Data][Cr]
Data
00: Vivid
01: Standard
02: Cinema
03. Sport
04: Game
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
To adjust the screen contrast.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
00 to 64: Contrast 0 to 100
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
Transmission / Receiving protocol 85
This manual is related to the following products: