beautypg.com

HP LD4245tm 41.92-inch Interactive LED Digital Signage Display User Manual

Page 59

background image

The recognition speed of a USB storage device may depend on each device.

Do not turn off the display or unplug the USB device when the connected USB storage device is

working. When such a device is suddenly separated or unplugged, the stored files or the USB

storage device may be damaged.

Only use a USB storage device that has normal music files, image files or video files.

Use only a USB storage device that was formatted as a FAT32 file system, NTFS file system by

with the Windows operating system. In case of a storage device formatted with a different utility

program that is not supported by Windows, it may not be recognized.

Connect power to a USB storage device (over 0.5 A) that requires an external power supply. If

not, the device may not be recognized.

Connect a USB storage device with the cable included by the device maker.

Some USB storage devices may not be supported or operate smoothly.

File alignment method of USB storage devices can recognize up to 100 English characters.

Be sure to back up important files since data stored on a USB memory device may be damaged.

We will not be responsible for any data loss.

If the USB HDD does not have an external power source, the USB device may not be detected.

So be sure to connect the external power source. Please use a power adaptor for an external

power source.

If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you

can use up to 4 partitions or USB memory devices.

If a USB memory device is connected to a USB multi-card reader, its volume data may not be

detected.

If the USB memory device does not work properly, disconnect and reconnect it.

How fast a USB memory device is detected differs from device to device.

If the USB is connected in Standby Mode, that drive will automatically be loaded when the

display is turned on.

The recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or less for

USB memory.

Any device with more than the recommended capacity may not work properly.

If a USB external hard disk with a “Energy Saving” function does not work, turn the hard disk off

and on again to make it work properly.

USB storage devices below USB 2.0 are supported as well. But they may not work properly with

videos.

A maximum of 999 folders or files can be recognized under one folder.

It is recommended you use a certified USB storage device and cable. Otherwise, a USB storage

device may not be detected or a playback error may occur.

A USB 3.0 storage device may not work.

Connecting USB storage devices 49

This manual is related to the following products: