HP LD4245tm 41.92-inch Interactive LED Digital Signage Display - Manual (Page 17)

Portrait layout
To install in portrait orientation, rotate the display counterclockwise 90 degrees when looking at it
from the front.
Using the security system
The security system connector is located at the back of the display.
Connect the security system cable between the display and a table.
NOTE: The security system is separately purchased. You can obtain additional accessories from
most electronics stores.
Mounting the display on a wall
For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation
instructions are available from the manufacturer of the mounting equipment.
Portrait layout 7