HP OneView for Microsoft System Center - Manual (Page 6)

2 Support matrix
Supported System Center products
•
SCVMM 2012 R2 Console or later
•
SCVMM 2012 R2 or later (for deployment)
Supported infrastructure
•
HP OneView 1.10 (Hyper-V and VMware appliances)
•
HP BladeSystems c3000 and c7000 Enclosures with Onboard Administrator
•
HP Virtual Connect Flex-10, Flex-10/10D, or FlexFabric Ethernet Modules (firmware version
4.10 or later)
•
3PAR storage systems configured through FCoE fabric or using VC Fibre Channel modules
Restrictions:
•
HP OneView does not support HP BladeSystems c3000 Enclosure.
•
Private volumes, Boot-from-SAN, and storage systems other than 3PAR are not supported.
•
iSCSI is only supported for Virtual Connect Manager.
Supported servers
BL680c G7 BL490c G7 BL465c G6 BL420c Gen8
BL685c G6 BL495c G6 BL465c G7 BL460c G6
BL685c G7 BL620c G7 BL465c Gen8 BL460c G7
BL660c Gen8 BL490c G6 BL460c Gen8
Restrictions:
•
HP OneView does not support ProLiant G6 servers and the ProLiant BL680c G7 server.
Supported target operating systems (for deployment)
The following operating systems are supported for deployment using the Add Capacity Wizard:
•
Windows Server 2008 R2 SP1
•
Windows Server 2012
•
Windows Server 2012 R2
Restrictions:
•
Configuring network adapters to be connected to logical switches is not supported on Windows
Server 2008 R2.
Supported target servers (for deployment)
The following servers are supported for deployment using the Add Capacity Wizard:
BL620c G7 BL465c G7 BL420c Gen8
BL660c Gen8 BL465c Gen8 BL460c G7
BL685c G7 BL490c G7 BL460c Gen8
6 Support matrix