HP Officejet Pro K8600 Printer - Manual (Page 24)

4. Press the button on top of the paper guide and slide the guide to the right until it
stops at the edge of the media.
5. Press the input tray lock and slide the tray in until the small media guide stops at
the edge of the media. As you slide the tray, the small media guide extends until it
touches the edge of the media.
6. Lower the output tray.
7. When printing, select the appropriate media type and size from the printer driver.
For more information, see Understand specifications for supported media .
To load the rear manual feed slot
1. If the duplexer is installed, replace it with the rear-access panel.
NOTE: If you cannot locate the rear-access panel, cancel the print job and
print using the main tray. For more information, see
Cancel a print job .
2. Send the print job.
3. Wait for the Resume light to blink.
4. Lift up the feed slot and then slide the paper guide to the required media width.
Chapter 3
20 Use the device