HP Integrity NonStop H-Series - Manual (Page 25)

9800FC (CT9800FC) Fibre Channel Converter Installation and User’s Guide— 524957-003
2 -1
2
Installing a Fibre Channel
Converter
This section has the following topics:
Overview of an Initial Installation
1. Installation varies depending on whether the Fibre Channel converter is
installed in an enclosure, rack, or table top:
•
To install Fibre Channel converters in a 729x enclosure, refer to Section
2, Installing a 729x enclosure. If the enclosures do not arrive prestacked,
contact your service provider. The converters are already preinstalled
inside but might need to be removed for stacking.
•
To install Fibre Channel converters in a customer-supplied rack:
a. See Unpacking a Fibre Channel Converter on page 2-2.
b. See , Adding a Fibre Channel Converter to an Enclosure or
Customer-Provided Rack, on page 2-3
•
To install Fibre Channel converters on a table top, proceed to step 2.
2. Connect all the cables on the Fibre Channel converter. Refer to Section 3,
Cabling the Fibre Channel Converter. Refer to Appendix A, Multimode Fiber
Optic Cables for cable part numbers.
3. Connect the Fibre Channel converter to the NonStop S-series server.
4. Use SCF to configure the Fibre Channel converter and attached storage
devices for the NonStop S-series server.
Overview of an Initial Installation 2-1
Unpacking a Fibre Channel Converter 2-2
Adding Fibre Channel Converters to an
Existing Installation 2-2
Adding Mounting Brackets to a Customer-
Provided Rack 2-3
Adding a Fibre Channel Converter to an
Enclosure or Customer-Provided Rack 2-3