HP Integrity NonStop H-Series - Manual (Page 18)

Overview of the Fibre Channel Converter
9800FC (CT9800FC) Fibre Channel Converter Installation and User’s Guide— 524957-003
1 -4
SCSI ID
SCSI Port
The Fibre Channel converter is a high-voltage differential (HVD) model that
supports ultrawide data transfer at up to 40 MB/sec per channel and has internal
SCSI termination.
The SCSI channel on the Fibre Channel converter connects to a supported SCSI port
on the NonStop S-series server.
Table 1-1. SCSI Port Connections
SCSI ID
Fibre Channel converter is preconfigured to run on a NonStop S-Series server.
You should not need to reconfigure the SCSI ID on the Fibre Channel converter.
The Fibre Channel converter is configured as SCSI ID 8.
The Fibre Channel converter has an entry for a tape drive configured as SCSI
ID 5. If you have a tape library that requires that you configure the tape drives
using any SCSI ID other than 5, contact your service provider.
IOMF IOMF 2 ServerNet/DA
S-SAC
ServerNet/DA
F-SAC
PMF CRU
No Yes Yes No S74000
S76000
S86000
or later