HP Designjet 10000s Printer series - Manual (Page 277)

● Store the full bottle in an area that has been prepared for this purpose until it is emptied or removed
by a waste management company for disposal. Consult your local authorities about requirements or
for advice on storing hazardous waste.
● The bottle is provided with an undetachable cap to safely and securely close the bottle to avoid spillage
when it is handled or transported.
● Use disposable latex or Nitrile (R) safety gloves to handle or transport the bottle once full.
● If you are emptying the HP supplied bottle into a larger container, use the container for this chemical
exclusively. Never mix this chemical with other chemicals in the same container. Seal the drum with
a cap after pouring ink into it, store it 25 feet (8 m) away from ignition sources, do not store in high
temperature areas , store away from direct sunlight. This represents a serious safety hazard.
ENWW General recommendations 267
Tell
me about
w
aste
man
ag
ement