HP Deskjet Ink Advantage D730 Printer - Manual (Page 45)

To preview a printed document
1. Open the
Printer Properties dialog box .
2. Click the Features or the Color tab.
3. Select the Show preview before printing check box.
4. Select any other print settings that you want, and then click OK.
Before the document prints, a preview is displayed.
5. Do one of the following:
• Click OK to print the document.
• Click Cancel to cancel the print job. Adjust the print settings as needed before
printing the document.
Set a custom paper size
Use the Custom Paper Size dialog box to print on a special paper size.
NOTE: This feature is not available for all paper types.
To define a custom paper size
1. Open the
Printer Properties dialog box .
2. Click the Features tab.
3. In the Size drop-down list, select Custom.
The Custom Paper Size dialog box is displayed.
4. In the Name box, type a name for the custom paper size.
5. In the Width and Length boxes, type the dimensions of the custom paper size.
The minimum and maximum dimensions are displayed beneath Width and Length.
6. Click the unit of measurement: Inches or Millimeters.
7. Click Save to save the custom paper size.
8. Click OK to exit the Custom Paper Size dialog box.
9. To use the custom paper size, select its name in the Size drop-down list.
Select a paper type
When printing a higher-quality document, HP recommends that you select a specific
paper type.
To select a specific paper type
1. Open the
Printer Properties dialog box .
2. Click the Features tab.
3. Click More in the Paper Type drop-down list, and then select the paper type that you
want to use.
4. Click OK.
5. Select any other print settings that you want, and then click OK.
Select a paper type 43
Printing
tips