HP ep9012 Digital Projector - Manual (Page 70)

70 User’s Guide
Reference
Video compatibility NTSC 3.58 MHz and 4.43 MHz
PAL B, D, G, H, I, M, N
SECAM B, D, G, K, K1, L
HDTV (480i/p, 575i/p, 720p, 1080i)
DVI with HDCP
PC video up to SXGA (by DVI-I connector)
IR receiver Front and back of projector
Lamp 210-watt lamp
4000-hour average lamp life (to half of original brightness)
Replacement lamp: L1731A
Optics 1.7 to 2.0 throw ratio (distance/width)
1 to 10 m (3 to 33 ft) focus range
128% offset (relative to half-height)
1.16:1 optical zoom
Light engine 0.55-in. 12° DDR DMD
Audio 60-watt total peak power
15-watt per channel peak stereo speakers (two speakers
per channel facing front and rear)
30-watt peak subwoofer
Noise level less than 34 dBA
Vertical tilt ±10°
Vertical keystone
correction ±20%
Power 100 to 240 V at 50 to 60 Hz
Environment Operating:
Temperature: 5 to 35 °C (41 to 95 °F)
Humidity: 80% RH max, non-condensing
Altitude: up to 3,000 m (10,000 ft), up to 25 °C (77 °F)
Storage:
Temperature: –20 to 60 °C (–4 to 140 °F)
Humidity: 80% RH max, non-condensing
Altitude: up to 12,000 m (40,000 ft)
Projector specifications (Continued)