HP ep9012 Digital Projector - Manual (Page 38)

38 User’s Guide
Playing DVDs and CDs
The following types of media are supported: DVD-ROM, DVD-R, DVD+R,
DVD-RW, DVD+RW, CD-R, and CD-RW. Recording conditions might affect
whether individual discs are playable.
Playing a DVD
1. Press the DVD eject button on the projector or remote control to open the
tray.
2. Place the DVD on the tray.
3. Press the DVD eject button again to close the tray. If the projector is off,
it turns on and starts warming up. Then it starts playing the DVD.
4. If a DVD menu displays, press the navigation buttons to make a selection,
and then press ok.
5. Press the play/pause button to pause or resume playing.
6. Press the stop button to stop playing.
7. Press the eject button to open the tray and remove the DVD, and then
press it again to close the tray.
If you want to adjust the picture, see “Changing the picture mode” on page 33.
✎
The internal DVD player and all DVDs are coded with a DVD region code.
These codes must match to play the DVD. If the DVD code does not match
the player’s code, the DVD does not play and the projector displays an error
message.