HP ep9012 Digital Projector - Manual (Page 18)

18 User’s Guide
Setting up
Connecting power
1. Place the projector on a stable platform located 1 to 10 m (3 to 33 ft) in front
of the screen. Ideally, the platform should be lower than the bottom of the
screen.
✎
Do not place the projector on a soft surface, such as carpet or loose cloth.
This will severely limit the sound from the subwoofer.
2. Connect one end of the power cord to the back of the projector 1 and the
other end to a grounded electrical outlet 2 .