HP Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 25)

Troubleshooting 25
Error code Details
VCSU_ERROR_HEALTH_ABORTED
Aborted
VCSU_ERROR_HEALTH_DORMANT Dormant
VCSU_ERROR_HEALTH_SUPPORTING_ENTITY_IN_ERROR Supporting Entity In Error
VCSU_ERROR_HEALTH_COMPLETED
Completed
VCSU_ERROR_HEALTH_POWER_MODE Power Mode
VCSU_ERROR_HEALTH_DMTF_RESERVED DMTF Reserved
VCSU_ERROR_HEALTH_VENDOR_RESERVED Vendor Reserved
VCSU_ERROR_VLANID_NOT_SAME Interconnect Module VLAN ID is different from
OA.
VCSU_ERROR_CONNECTION_UNKNOWN_MODULE Unknown Module in bay
VCSU_ERROR_CONNECTION_FAILED IP connection to the module failed.
VCSU_ERROR_OPERATIONAL_MODE_UNKNOWN Unknown operational mode of the module
VCSU_ERROR_DOMAIN_CONFIG_NOT_IN_SYNC Domain Configuration is not in sync.
VCSU_ERROR_MODULE_CONFIG_NOT_IN_SYNC Module Configuration is not in sync.
VCSU_ERROR_MODULE_CONFIG_FIRMWARE_
INCOMPATIBLE
Module Firmware Incompatible
VCSU_ERROR_MODULE_CONFIG_INVALID_STATE Module Configuration is invalid.
VCSU_ERROR_UNSUPPORTED_CONFIGURATION
Enclosure or Interconnect Modules are in an
unsupported configuration.
VCSU_ERROR_SIM_INIT_FAILED VCSU Simulator initialization failed.
VCSU_ERROR_CONFIG_READ_ERROR Error reading VCSU Simulator Configuration
VCSU_ERROR_CONFIG_ELEM_NOT_FOUND Element information not found in the XML
configuration file
VCSU_ERROR_UNSUPPORTED_VCSU_VERSION This version of VCSU does not support the
update of specified firmware package.
VCSU_ERROR_UNSUPPORTED_OA_VERSION
One or more enclosure Onboard
Administrators is not running the minimum
required firmware version required by the
firmware package.
VCSU_ERROR_ACTIVATE_PRIMARY_BACKUP_FAILURE
Failed to activate primary/backup pair
VCSU_ERROR_VCEM_FW_MAINTENANCE_MODE VC is locked and in firmware maintenance state
VCSU_ERROR_PRIMARY_BACKUP_HEALTH_NOT_OK The health of primary or standby module is not
OK. The update cannot proceed.
VCSU_ERROR_MIN_TARGET_VERSION_ROLLBACK_
DOWNGRADE The target version does not support the
downgrade of Virtual Connect firmware without
deletion of domain configuration.
VCSU_ERROR_MIN_VCM_VERSION_ROLLBACK_
DOWNGRADE The current version of Virtual Connect firmware
does not support the downgrade without
deletion of domain configuration.
VCSU_ERROR_PRIMARY_NOT_IN_LOWER_BAY_FOR_
DOWNGRADE
Presence of subordinate module on lower bay
before primary module will not allow
downgrade.
VCSU_ERROR_ROLLBACK_DOWNGRADE_WILL_NOT_
PROCEED_FOR_MANUAL_ENET_ACTIVATION
Rollback downgrade will not proceed for
manual activation of E-net modules.
VCSU_ERROR_VCM_LOCKED_BY_VCEM_AND_FW_
MAINTENANCE_MODE VC is locked by VCEM Firmware Maintenance
mode. Downgrade will not proceed.