HP Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 23)

Troubleshooting 23
Error code Details
VCSU_ERROR_FTP_NOT_READY
The FTP server is not ready.
VCSU_ERROR_FTP_USERNAME_NOT_VALID The FTP username is not valid.
VCSU_ERROR_FTP_PASSWORD_INVALID The FTP password is not valid.
VCSU_ERROR_FTP_REJECTED_PASSIVE_MODE
The FTP server rejected passive mode.
VCSU_ERROR_FTP_REJECTED_COMMAND The FTP server rejected the command.
VCSU_ERROR_FTP_NO_RESPONSE The FTP server is not responding.
VCSU_ERROR_FTP_RECEIVE_ERROR An FTP receive error exists.
VCSU_ERROR_FTP_INVALID_IP Invalid FTP server IP address
VCSU_ERROR_NO_UPDATABLE_MODULES No target modules are found that can be
updated.
VCSU_ERROR_MODULE_UPDATE_NOT_REQD The specified module is not required to be
updated.
VCSU_ERROR_MODULE_ACTIVATE_NOT_REQD The specified module is not required to be
activated.
VCSU_ERROR_MODULE_INFO_NOT_AVAILABLE The specified module's information is not
available.
VCSU_ERROR_MODULE_NOT_PRESENT The specified module is not present.
VCSU_ERROR_MODULE_NOT_POWERED_ON The specified module is not powered on.
VCSU_ERROR_MODULE_NOT_OPERATIONAL
The specified module is not operational.
VCSU_ERROR_ADMIN_PERMISSIONS_REQD The admin privileges are required to upgrade
specified modules.
VCSU_ERROR_CHECKPOINT_RENAME_FAILED
The checkpoint rename operation failed on the
specified modules.
VCSU_ERROR_VCM_CONFIGURATION_NOT_IN_SYNC The VC configuration is still not in sync.
VCSU_ERROR_VCM_FAILOVER_FAILED
Failover to backup module failed.
VCSU_ERROR_BAY_CONFIGURATION_FAILED Unable to configure the bay
VCSU_ERROR_CLI_COMMAND_EXECUTION_FAILED Unable to execute CLI command on the target
module
VCSU_ERROR_MODULE_NOT_UPGRADABLE The specified module is not upgradeable.
VCSU_ERROR_MODULE_COMMAND_FAILED The command on the target module failed.
VCSU_ERROR_RESET_TIME_OUT The reset on the target module timed out.
VCSU_ERROR_RESET_FAILED The reset on the target module failed.
VCSU_ERROR_INVALID_MODULEID The specified module ID is invalid.
VCSU_ERROR_PREVIOUS_UPDATE_NOT_COMPLETETD A previous firmware update operation on one
or more modules is not complete.
VCSU_ERROR_MULTIPLE_INSTANCE Another firmware update is running against the
specified OA.
VCSU_ERROR_FC2_FW_EXTRACTION_FAILED The extraction of the VC FC2 firmware package
failed.
VCSU_ERROR_DOWNGRADE_FROM_MULTIENCLOSURE
A downgrade from a 2.10 multi enclosure
domain is not supported.
VCSU_ERROR_NOT_MULTIENCLOSURE Invalid module IDs for single enclosure update
VCSU_ERROR_VCM_MODE_RESTORE_FAILED
Failed to restore the VC mode of primary or
backup module
VCSU_ERROR_ACTIVATION_FAILED
Failed to activate one or more modules
VCSU_ERROR_UNINITIALIZED_MUTEX Invalid mutex found