beautypg.com

Load a roll into the printer – HP Designjet T2500 eMultifunction Printer series User Manual

Page 64

background image

7.

Put the blue stop onto the open end of the spindle, and push it towards the end of the roll.

8.

Ensure that the blue stop is pushed in as far as it goes; until both ends are against the stops, then close
the latch.

If you are a regular user of different paper types, you can change rolls more quickly if you preload rolls of
different paper types on different spindles. Extra spindles are available for purchase, see

Supplies and

accessories on page 166

.

Load a roll into the printer

To start this procedure, you must have a roll loaded on the spindle. See

Load a roll onto the spindle

on page 51

.

TIP:

Do not try to open both roll covers at once; this may cause problems. Always close one cover before

opening the other.

NOTE:

The first two steps below are optional: you can start with step 3. However, in this case the printer

will not keep track of the length of the roll, and will print no barcode on the roll when it is next unloaded. So
you are recommended to follow all the steps, starting with step 1, unless you have turned off the Printing
paper info
option. See

Printing paper info on page 63

.

1.

From the front panel, press

, then

if it is not already highlighted, then the roll icon, then

Load.

Alternatively, press

, then

, then Paper > Paper load > Load roll 1 or Load roll 2.

54

Chapter 6 Paper handling

ENWW