HP ProLiant DL360 G4 Server - Manual (Page 7)

Gathering information 7
Gathering information
Certificate of Authenticity
IMPORTANT: Note where the COA label is located on the server, and record the product key for
future reference.
The COA label is used for the following:
• Upgrade the factory-installed operating system using the Microsoft® Upgrade program for license
validation
• Reinstall the operating system because of a failure that has permanently disabled it
The COA label location varies by server model. On rack-mounted server models, the COA label is located
either on the front section of the right panel or on the right front corner of the top panel. On tower models, the
COA label is located toward the rear of the top panel of the server.
NOTE: The product key shown below is a general representation and may not be for the specific
product purchased.
NOTE: The product key is not needed at the time of the initial operating system installation
because the server comes from the factory with a product key already installed.
Record the product key in the space provided when the server is initially installed and the COA label is most
easily accessible.