HP ProLiant DL360 G4 Server - Manual (Page 22)

Post-installation tasks for HP ProLiant 300 series servers only 22
b. For Microsoft Windows Server 2012 Essentials, press the Windows key from the keyboard, then
right-click anywhere in the Start page, and then click All Apps>HP System Tool>HP Array
configuration utility>HP Array configuration utility.
2. Select whether you want to enable remote administration when prompted.
3. Click OK.
4. When prompted for the Web-Based Management password, enter the credentials for either the local
administrator account or a local user account in the following format:
domain name\login name
5. Configure the remaining physical drives into logical drives, and run Disk Administrator to partition and
format the additional drive space.
For more information, see the Configuring Arrays on HP Smart Array Controllers Reference Guide on the HP
website (
http://www.hp.com/support/CASAC_RG_en ).
Using Management Agents
The Management Agents for servers are installed during the setup process. For more information about the
Management Agents, refer to the HP Insight Management Agents User Guide
(
http://h18013.www1.hp.com/products/servers/management/agents/documentation.html ).