HP Designjet 2500.3500cp Printer series - Manual (Page 303)

Reference
Printer Specifications
13-3
Margins Normal Smaller (roll media
only) Extended (roll media
only)(default)
Using CP ink
systems (Imaging) Leading edge:
Trailing edge:
Sides: 19 mm (0.75 in)
17 mm (0.67 in)
15 mm (0.59 in) 10 mm (0.39 in)
10 mm (0.39 in)
15 mm (0.59 in) 29 mm (1.14 in)
27 mm (1.06 in)
15 mm (0.59 in)
Using CP ink
systems (UV) with
HP or 3M media
Leading edge:
Trailing edge:
Sides: 46 mm (1.81 in)
17 mm (0.67 in)
15 mm (0.59 in) 10 mm (0.39 in)
10 mm (0.39 in)
15 mm (0.59 in) 56 mm (2.20 in)
27 mm (1.06 in)
15 mm (0.59 in)
All measurements
±
2 mm (0.08 in).
Resolution by Print
Mode setting Fast
Normal
Best 300 x 300 dpi.
300 x 300 dpi.
600 x 600 dpi.
Programming
languages
supported HP-RTL (with color extensions)
HP-GL/2
Adobe PostScript Level 3 (supports Asian languages)
PJL, PML
Accuracy selection
Using HP Matte film
as the reference test
media at 23ºC
(73ºF),
50-60% relative
humidity.
Optimized Constant Maximum
±
1.2% of the
specified page
length
±
0.7% of the
specified page
length
±
0.2% of the
specified page
length
Programming
languages
supported HP-RTL (with color extensions)
HP-GL/2
PJL, PML
Physical Specifications
Weight Length Depth Height
Packed Unit 115 kg (253 lbs) 1770 mm (69.7 in) 600 mm (23.6) 980 mm (38.6in)
Printer assembled
and ready to print 83 kg (183 lbs)
100kg (220lbs) (with
Take Up Reel) 1560 mm (61.4 in) 735 mm (28.9) 1225 mm (48.3in)
Functional Specifications