HP Designjet 2500.3500cp Printer series - Manual (Page 76)

Working with Media
Unloading Media from the Take Up Reel accessory
3-26
Unloading Media from the Take Up Reel accessory
To remove media from the printer see page 3-30, Removing a Roll from the Printer.
To unload roll media from the Take Up Reel perform the following procedure.
NOTE:Before unloading media ensure the ink is dry; see page 3-44, Drying time
(With a Take Up Reel).
1 Press the Form feed and cut button on the front panel.
2 Important: Remove the Media Weight shown below. It may help you to remove
the end-caps first.
C4704024
Form Feed
and Cut Cancel
Remove the Media Weight
C472347