Cleaning the printer, Cleaning the printer exterior and inside the doors, Cleaning the printer 10-2 – HP Designjet 2500.3500cp Printer series User Manual
Page 208
Maintaining Your Printer
Cleaning the Printer
10-2
Cleaning the Printer
WARNING
To avoid an electric shock, make sure that the printer is switched OFF and
unplugged before you clean it. Do not let water get inside the printer.
CAUTION
Do not use abrasive cleaners on the printer.
NOTE
Any maintenance or repairs beyond those described in this chapter should be
done by a qualified service technician.
Cleaning the Printer Exterior and Inside the Doors
■ Clean the outside of the printer as required with a damp sponge or a soft cloth
and a mild household cleaner such as non-abrasive liquid soap.
■ Over time, aerosol spray from the printheads may build up on the inside of the
left and right access doors and inside the printer window. This aerosol buildup
can be cleaned with a damp sponge or a soft damp cloth and a mild household
cleaner such as non-abrasive liquid soap.